聯系我們
濟南富強門業有限公司
聯系人:林經理
電話:151 6888 2846
郵箱:527800164@qq.com
地址:濟南市歷下區化纖廠路8號3號樓101號
電動卷簾門安裝要求需謹慎
來源:http://m.lyxtjx88.com 日期:2021-01-07 發布人:
好看的電動卷簾門在安裝過程中是比較困難的。其實不然,滿足了電動卷簾門的安裝要求,就可輕易的進行安裝,那么我們看一下具體有哪些安裝要求。
The beautiful electric rolling door is difficult to install. In fact, to meet the installation requirements of electric rolling shutter doors, it can be easily installed, then let's see what specific installation requirements.
1、安裝電動卷簾門的洞口上部不得設有通風管、水管等。
1. The upper part of the opening of the electric rolling door can not be equipped with ventilation pipes and water pipes.
2、電源線路(三相五線和消防中控信號線)由用戶鋪設到卷門機旁的電氣控制箱邊。
2, power lines (three phase five line and fire control signal line) are laid by users to the electrical control box beside the rolling door machine.
3、卷簾門安裝好后,安裝吊頂,吊頂邊緣應離簾板50mm,以免磨擦。
3. When the rolling door is installed, the ceiling should be installed. The edge of the ceiling should be 50mm away from the curtain to avoid friction.
4、安裝調試后,每季度啟動一次,以檢查電器、機械性能,檢查時注意操作。
4, after installation and commissioning, start once every quarter to check electrical and mechanical properties, and inspect operation safety.
5、調試及使用時,嚴禁底部站人.電器設施不得擅自拆搬。
5. When debugging and using, the bottom stand is strictly prohibited. Electrical installations must not be demolished without authorization.
感謝大家在百忙之中關注公司發布的產品信息,如果你想要了解更多,可以來我們公司咨詢。我們歡迎大家的光臨,并與你的合作!
Thank you for your busy schedule to pay attention to the product information released by the company. If you want to know more, you can come to our company for consultation. We welcome your presence and cooperate with you!
閱讀/ Recommended reading
- 如何維修卷簾門 2025-01-15
- 如果卷簾門無法上下移動怎么辦 2025-01-04
- 電動卷簾門限位怎么調 2024-12-28
- 車庫卷簾門故障及維修方法 2024-12-23
- 濟南卷簾門的優點分析 2024-12-16
- 濟南卷簾門的安裝指南:步驟與注意事項 2024-12-11
- 濟南卷簾門的維修保養:延長使用壽命的關鍵 2024-12-09
- 濟南卷簾門:卷簾門遙控器失靈時試試本文的方法吧! 2024-11-16
如果卷簾門無法上下移動怎么辦
2025-01-20
當卷簾門無法上下移動時,可以采取以下步驟進行故障排查和維修: When the rolling shutter door cannot move up and down, t...